LG Electronics Fastap AX490 User Manual

ENGLISH

USER GUIDE

A X 4 9 0

Please read this manual carefully before operating your mobile

phone. Retain it for future reference.

(

)

P/N: MMBB0202001 1.0

LG and the LG logo are registered trademarks of LG Group

and its related entities. All other trademarks are the property

of their respective owners.

IMPORTANT SAFETY PRECAUTIONS

Read these instructions. Breaking the rules may be dangerous or illegal.

Further detailed information is given in this user guide.

WARNING! Violation of the instructions may cause serious injury or death.

1. Never use an unapproved battery since this could damage the phone and/or battery and could

cause the battery to explode.

2. Never place your phone in a microwave oven as it will cause the battery to explode.

3. Never store your phone in temperatures less than -4°F or greater than 122°F.

4. Do not dispose of your battery by fire or with hazardous or flammable materials.

5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If

wireless equipment is improperly installed and the air bag is deployed, you may be seriously

injured.

6. Do not use a hand-held phone while driving.

7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)

IMPORTANT SAFETY PRECAUTIONS

1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high

humidity, such as a bathroom.

2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean

your phone. This could cause a fire.

3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the

phone.

4. Do not use your phone in high explosive areas as the phone may generate sparks.

5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if

it is loose as it may cause a fire or electric shock.

6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as

it may cause electric shock or fire.

7. Do not handle the phone with wet hands while it is being charged. It may cause an electric

shock or seriously damage your phone.

8. Do not disassemble the phone.

1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or

cause electric shock or fire.

2. Do not hold or let the antenna come in contact with your body during a call.

3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the

battery. This could cause a fire.

4. Store the battery out of reach of children.

5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection

parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in serious injury

or death.

6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

7. Only use the batteries and chargers provided by LG. The warranty will not be applied to

products provided by other suppliers.

8. Only authorized personnel should service the phone and its accessories. Faulty installation or

service may result in accidents and consequently invalidate the warranty.

9. An emergency call can be made only within a service area. For an emergency call, make sure that

you are within a service area and that the phone is turned on.

TABLE OF CONTENTS

Battery Charge Level

Important Safety Precautions1

Entering and Editing

Information

Turning the Phone On and Off

Turning the Phone On

Table of Contents

Text Input

Turning the Phone Off

Key Functions

Text Input Examples

Welcome

Signal Strength

Screen Icons

Contacts in Your Phone’s

Memory

Technical Details

Q^Mu^aic^kk^ingA^Cc^ac^lle^sss to Convenient¹⁹

Correcting Dialing Mistakes

FCC RF Exposure Information

The Basics of Storing Contacts

Entries

Phone Overview

Features

Options to Customize Your

Menus Overview

Contacts

Manner Mode

Lock Mode

Adding or Changing the Group

Getting Started with Your

Phone

Changing the Call Ringer

Mute Function

Volume Quick Adjustment

Call Waiting

Adding or Changing the Memo

The Battery

Adding or Changing the Picture ID 25

Installing the Battery

Removing the Battery

Adding Speed Dial

Caller ID

Editing Contacts Entries

Speed Dialing

Charging the Battery

Adding Another Phone Number

Default Numbers

From Recent Calls

Speed Dialing

7.8 Quick Text

Changing the Default Number

Editing Stored Phone Numbers

Editing Stored Names

7.9 Text-Auto Play

7.0 Text-Signature

7.* 2-Min Reminder

8. Delete All

Menu Access

Messaging

Editing Customized Options

1. New Text Message

Deleting

2. New Photo Message

Deleting a Contact Entry or a Phone

AxcessApps

Number from a Contact

3. Inbox

1. Axcess Apps

Additional Ways to Delete a Contact 29

4. Sent

2. Axcess Info

Deleting a Speed Dial

5. Drafts

Axcess Web

Phone Numbers With Pauses

6. Voice Mail

Storing a Number with Pauses

1. Start Browser

Adding a Pause to an Existing

7. Settings

2. Web Messages

Number

7.1 Auto Save

3. Web Alerts

Searching Your Phone’s Memory 31

7.2 Auto Delete

Scrolling Through Your Contacts

Searching by Letter

Multimedia

7.3 Text-Auto View

7.4 Photo-Auto Receive

7.5 Text-Callback #

7.6 Voice Mail #

7.7 Entry Mode

1. Take Photo

Searching Options

2. Record Voice

3. Gallery

Making a Call From Your Phone’s

Memory

From Contacts

4. Voice Clip

TABLE OF CONTENTS

1.2 Key Tone

2. Sounds

Contacts

1.3 Flip Tone

1. Contacts

3. Message Objects

1.4 Volume

2. New Contact

3. Groups

4. Shuffle

1.5 Message Alert Tones

Tools

1.6 Service Alerts

1.6.1 Service Change

1.6.2 Minute Beep

1.6.3 Call Connect

1.6.4 Back To Top

4. Speed Dials

1. Voice Command

5. My Contact Info

2. My Menu

3. Alarm Clock

Recent Calls

1. Missed Calls

4. Calendar

1.7 Power On/Off Tones

2. Dialed Calls

3. Received Calls

4. Data Calls

5. All Calls

5. Tip Calculator

2. Display

6. Notepad

2.1 Screens

7. Calculator

8. World Clock

9. Stopwatch

2.2 Banner

2.3 Backlight

6. Call Timer

7. Data Count

2.4 Menu Style

2.5 Languages

2.6 Clocks & Calendar

2.7 Calling Fonts

Settings

1. Sound

My Media

1. Images

1.1 Ringers

2.8 Color Schemes

5.6 Auto Volume

5.7 Application Mode

5.8 TTY

Safety

3. System

TIA Safety Information

3.1 System Select

3.2 Set NAM

Exposure to Radio Frequency Signal 76

6. Data Settings

Antenna Care

3.3 Auto NAM

3.4 Serving System

4. Security

6.1 PC Connection

Phone Operation

Tips on Efficient Operation

Driving

7. Bluetooth

7.1 Paired Devices

Electronic Devices

Pacemakers

4.1 Lock Phone

4.2 Restrict Calls

4.3 Emergency #s

4.4 Change Lock Code

4.5 Reset Default

5. Call Setup

7.2 Power

7.3 My Visibility

7.4 My Bluetooth Name

7.5 My Bluetooth Info

8. Location

Persons with pacemakers:

Hearing Aids

Other Medical Devices

Health Care Facilities

Vehicles

9. Phone Info

Posted Facilities

Aircraft

5.1 Auto Retry

9.1 My Number

9.2 SW Version

5.2 Answer Call

5.3 Auto Answer

5.4 One-Touch Dial

5.5 Voice Privacy

Blasting Areas

9.3 Icon Glossary

Potentially Explosive Atmosphere

9.4 Memory Status

For Vehicles Equipped with an

Air Bag

TABLE OF CONTENTS

Safety Information

Accessories

Index

Charger and Adapter Safety

Battery Information and Care

Limited Warranty Statement 96

Explosion, Shock, and Fire Hazards 80

General Notice

Avoid damage to your hearing

FDA Consumer Update

10 Driver Safety Tips

Consumer Information on

SAR

FCC Hearing-Aid Compatibility

(HAC) Regulations for Wireless

Devices

Some of contents in this user guide maybe different from your phone

depending on the software of the phone or your service provider. Features

and specifications might be subject to change without prior notice.

WELCOME

Thank you for choosing the advanced and compact

AX490 cellular phone, designed to operate with the

latest digital mobile communication technology, Code

Division Multiple Access (CDMA) and Advanced

Mobile Phone Service (AMPS). Along with the many

advanced features of the CDMA system, such as

significantly enhanced voice clarity, this phone offers:

Important Information

This user’s guide provides important information on

the use and operation of your phone. Please read all

the information carefully prior to using the phone for

the best performance and to prevent any damage to

or misuse of the phone. Any unapproved changes or

modifications will void your warranty.

●

Large, easy-to-read, 9-line backlit LCD with status

FCC Part 15 Class B Compliance

icons

This device and its accessories comply with part 15 of

FCC rules. Operation is subject to the following two

conditions: (1) This device and its accessories may not

●

Paging, messaging, voice mail, and caller ID.

●

51-key keypad.

●

Speakerphone feature.

cause harmful interference, and (2) this device and its

accessories must accept any interference received,

including interference that causes undesired operation.

●

Menu-driven interface with prompts for easy

operation and configuration.

●

Any key answer, auto answer, auto retry, one-touch

Technical Details

and speed dialing with 99 memory locations.

The AX490 is a tri-mode phone that operates on both

●

Bilingual (English and Spanish) capabilities.

(Code Division Multiple Access CDMA) frequencies:

Bluetooth wireless technology.

cellular services at 800 MHz and (Personal

Communication Services PCS) at 1.9 Ghz. Also, the

AX490 works on Advanced Mobile Phone Service. We

call it a tri-mode phone. Since the phone operates on

Cellular, PCS and AMPS, the call fail rate is less than on

a conventional dual-mode or singlemode phone.

Note

The Bluetooth word mark and logos are owned by the

Bluetooth SIG, Inc. and any use of such marks by LG

Electronics is under license. Other trademarks and trade

names are those of their respective owners.

TE_CC_DMH_{A t}N_echnI_oC_logyA_usL_{es a}D_featE_ureT_caA_lledI_DL_SSS_S

CDMA Standard Designator

Description

(Direct Sequence Spread Spectrum) that enables

the phone to keep communication from being

crossed and to use one frequency channel by

multiple users in the same specific area. This

results in a 10-fold capacity increase when

CDMA Tri-mode Air Interface

14.4kbps radio link protocol and

inter-band operations

TIA/EIA-95A

TSB-74

Basic Air

Interface

ANSI J-STD-008

IS-95 adapted for PCS frequency

band cdma2000 1xRTT AirInterface

Advanced Mobile Phone Service

TIA/EIA-IS2000

ANSI TIA/EIA 553A

compared with analog mode. In addition, features

such as soft / softer handoff, hard Handoff, and

dynamic RF power control technologies combine

to reduce call interruptions.

TIA/EIA/IS-634

TIA/EIA/IS/651

MAS-BS

PCSC-RS

Network

TIA/EIA/IS-41-C

Intersystem operations

Non-signaling data comm.

TIA/EIA/IS-124

The Cellular and PCS CDMA networks consist

of MSO (Mobile Switching Office), BSC (Base

Station Controller), BTS (Base Station

TIA/EIA/IS-96-B Speech CODEC

TIA/EIA/IS-99

TIA/EIA/IS-637

TIA/EIA/IS-657

IS-801

Async Data and Fax

Short message service

Packet Data

Transmission System), and MS (Mobile Station).

Service

Position Determination

TIA/EIA/IS-707-A Service (gpsOne)

* TSB-74: Protocol between an IS-95A system

and ANSI J-STD-008

High Speed Packet Data

1xRTT system receives twice as many

TIA/EIA/IS-97

TIA/EIA/IS-98

ANSI J-STD-018

ANSI J-STD-019

TIA/EIA/IS-125

Cellular base station

subscribers in the wireless section as IS-95. Its

battery life is twice as long as IS-95. High-

speed data transmission is also possible.

Cellular mobile station

PCS personal station

PCS base station

Performance

Speech CODEC

The following table lists some major CDMA

standards.

FCC RF Exposure Information

components should not be used. Avoid the use of

accessories that cannot maintain 0.6 inches (1.5 cm)

distance between the user’s body and the back of the

WARNING! Read this information before operating

the phone.

phone and have not been tested for compliance with

FCC RF exposure limits.

In August 1996, the Federal Communications

Commission (FCC) of the United States, with its action in

Report and Order FCC 96-326, adopted an updated

Vehicle-Mounted External Antenna

(Optional, if available.)

safety standard for human exposure to Radio Frequency

(RF) electromagnetic energy emitted by FCC regulated

transmitters. Those guidelines are consistent with the

safety standard previously set by both U.S. and

international standards bodies.

A minimum distance of 8 inches (20cm) must be

maintained between the user / bystander and the

vehicle-mounted external antenna to satisfy FCC RF

exposure requirements. For more information about

RF exposure, visit the FCC website at www.fcc.gov.

The design of this phone complies with the FCC

guidelines and these international standards.

Caution

Bodily Contact During Operation

Use only the supplied and approved antenna. Use of

unauthorized antennas or modifications could impair

call quality, damage the phone, void your warranty

and/or result in violation of FCC regulations.

This device was tested for typical use with the back

of the phone kept 0.6 inches (1.5 cm) from the

body. To comply with FCC RF exposure requirements,

a minimum separation distance of 0.6 inches (1.5 cm)

must be maintained between the user’s body and the

back of the phone, including the antenna, whether

extended or retracted. Third-party belt-clips, holsters,

and similar accessories containing metallic

Do not use the phone with a damaged antenna. If a

damaged antenna comes into contact with the skin a

minor burn may result. Contact your local dealer for

a replacement antenna.

PHONE OVERVIEW

Earpiece

Alphabetical

Camera Lens

Numeric

External Display

Flash

Flip

LCD Screen

Navigation Keys

OK Key

Headset Jack

Left Soft Key

Right Soft Key

PWR/END Key

SEND Key

Side Keys

Side Camera Key

BACK/Speaker Key

Voice Dial/Voice Memo Key

Fastap Keypad

Manner Mode Key

Shift Key

Lock Mode Key

Microphone

Earpiece Lets you hear the caller.

Right Soft Key Use to access the menu assigned to

the right screen of the phone.

Flip Open the case to answer an incoming call and

close to end the call.

PWR/END Key Use to turn the power on/off and to

end a call. Also use to return to the main menu display

screen.

LCD Screen Displays messages and indicator icons.

Headset Jack Use to plug the earphone to let you

Side Camera Key Use for quick access to Camera

function (Press and hold for about 3 seconds to use

camera function on the outside/inside display).

hear callers.

Left Soft Key Use to access the menu assigned to

the left screen of the phone.

BACK/Speaker Key Press to delete a single space or

SEND Key Use to place or answer calls.

character. Press and hold to delete entire words. Press

this key once in a menu to go back one level. Use for

quick access to Speakerphone Mode(from standby

mode press and hold for about 3 seconds)

Side Keys Use to adjust the ringer volume in standby

mode and the earpiece volume during a call.

Voice Dial/Voice Memo Key Use for access to Voice

Fastap Keypad Use to enter numbers, characters

Commands and Voice Memo.

and symbols much faster than any other keyboard we

have offered.

Manner Mode Key Use to set the mode (from

standby mode press and hold

for about 3 seconds).

Lock Mode Key Use to set the lock function (from

Shift Key In editing text,

standby mode press and hold

for about 3 seconds).

●

Short press: shift mode.

Microphone Lets callers hear you.

●

Long press: shift lock mode.

Camera Lens Projects the object when taking a picture.

External Display Displays the inner LCD screen.

Flash Use to add flash when taking photos.

●

To cancel the shift lock mode: press shift key shortly.

Navigation Keys Use for quick access to Messaging,

Ringers, Axcess Apps. and Mobile Web.

OK Key Use for quick access to My Menu. Lets you

access to favorite menu quickly by customizing my menu.

MENUS OVERVIEW

8. Delete All

Messaging

Contacts

My Media

1. Inbox

1. Contacts

1. New Text Message

2. Sent

1. Images

2. New Contact

3. Groups

2. New Photo Message

3. Drafts

2. Sounds

3. Inbox

4. All

3. Message Objects

1. Small Pictures

2. Large Pictures

3. My Pictures

4. Sounds

4. Speed Dials

4. Sent

5. My Contact Info

5. Drafts

Axcess Apps

6. Voice Mail

Recent Calls

1. Axcess Apps

7. Settings

2. Axcess Info

1. Missed Calls

2. Dialed Calls

3. Received Calls

4. Data Calls

5. All Calls

1. Auto Save

5. My Melodies

6. Animations

7. My Animations

4. Shuffle

2. Auto Delete

3. Text-Auto View

4. Photo-Auto Receive

5. Text-Callback #

6. Voice Mail #

7. Entry Mode

Axcess Web

1. Start Browser

2. Web Messages

3. Web Alerts

6. Call Timer

1. Last call

1. Ringtone List

2. Wallpaper List

2. Home calls

3. Roam calls

4. All calls

8. Quick Text

Multimedia

9. Text-Auto Play

0. Text-Signature

*. 2-Min Reminder

7. Data Count

1. Transmitted

2. Received

3. Total

1. Take Photo

2. Record Voice

3. Gallery

4. Voice Clip

6. Data Settings

1. PC Connection

7. Bluetooth

3. System

Tools

Settings

1. Sound

1. System Select

1. Voice Command

1. Call Someone

2. Digit Dial

2. Set NAM

1. Ringers

1. Paired Devices

2. Power

3. Auto NAM

2. Key Tone

3. Flip Tone

4. Volume

4. Serving System

3. Voice Mail

4. Missed Calls

5. Messages

3. My Visibility

4. My Bluetooth Name

5. My Bluetooth Info

8. Location

4. Security

1. Lock Phone

2. Restrict Calls

3. Emergency #s

4. Change Lock Code

5. Reset Default

5. Call Setup

5. Message Alert

Tones

6. Time & Date

6. Service Alerts

2. My Menu

1. Location on

2. E911 only

7. Power On/Off Tones

3. Alarm Clock

4. Calendar

2. Display

9. Phone Info

5. Tip Calculator

6. Notepad

1. Screens

1. My Number

2. SW Version

3. Icon Glossary

4. Memory Status

1. Auto Retry

2. Banner

2. Answer Call

7. Calculator

3. Backlight

3. Auto Answer

4. One-Touch Dial

5. Voice Privacy

6. Auto Volume

7. Application Mode

8. TTY

8. World Clock

9. Stopwatch

4. Menu Style

5. Languages

6. Clocks & Calendar

7. Calling Fonts

8. Color Schemes

GETTING STARTED WITH YOUR PHONE

The Battery

Note

Charging the Battery

To use the charger provided with your phone:

It is important to fully charge the battery before initial use

Warning! Use only the charger provided with the

phone. Using any charger other than the one included

with the AX490 may damage your phone or battery..

of the phone.

The phone comes with a rechargeable battery. Keep

the battery charged while not in use in order to

maximize talk and standby time. The battery charge

level is shown at the top of the LCD screen.

1. Plug the end of the adapter into the phone’s

charger port and the other end into an electrical

outlet.

2. The charge time varies depending upon the

battery level.

Installing the Battery

Battery Charge Level

To install the battery, insert the battery into the

opening on the back of the phone. Put the battery

cover on the battery and push it slightly upwards.

The battery charge level is shown at the top right of

the LCD screen. When the battery charge level

becomes low, the low battery sensor alerts you in

Removing the Battery

three ways: sounding an audible tone, blinking the

battery icon, and displaying Low Battery. If the

battery charge level becomes exceedingly low, the

Turn the power off. Lift the release latch to detach

the battery.

phone automatically switches off and any function in

progress is not saved.

Fully Charged

Empty

Turning the Phone On and Off

Turning the Phone On

Signal Strength

Call quality depends on the signal strength in your

area. The signal strength is indicated on the screen

1. Install a charged battery or connect the phone to

an external power source such as a cigarette lighter

charger or hands-free car kit.

as the number of bars next to the signal strength

icon: The more bars, the better the signal strength. If

the signal quality is poor, move to an open area. If

you are in a building, the reception may be better

near a window.

2. Press

for about 3 seconds until the LCD

screen lights up.

Note

Like any other radio device, avoid contact with the

antenna while your phone is on.

Turning the Phone Off

1. Press and hold

until the display turns off.

GETTING STARTED WITH YOUR PHONE

Screen Icons

To see the icon glossary, go to Menu -> Settings -> Phone Info -> Icon Glossary on your phone.

Signal Strength indicator. The strength of the signal received by the phone is indicated by the number of bars displayed.

Application Mode.

Battery Strength. Indicates battery charge level.

In Call State. A call is in progress. * No icon indicates the phone is in Main Menu Screen.

No Service. The phone is not receiving a system signal.

New Text Msg.

New Voice Mails indicator.

Digital indicator.

Analog indicator.

New Text&Voice message indicator.

Manner Mode.

SSL.

TTY.

Location On mode.

E911 Only Mode.

Vib./High Mode.

Data Active.

Data Dormant.

Car Kit.

Sounds Off.

QNC Data Active.

Announce Alerts.

Voice Privacy.

Speaker Phone.

Announce Ring.

Bluetooth On.

Visible.

Alarm.

Schedule.

Roaming.

Bluetooth Connect.

Making Calls

Correcting Dialing Mistakes

If you make a mistake while dialing a number, press

1. Make sure the phone is turned on. If not, press

for about 3 seconds.

once to erase the last digit entered, or hold

down

for at least 2 seconds to go to the

2. Enter the phone number (include the area code if

needed).

standby mode.

3. Press

Redialing Calls

lf the phone is locked, enter the lock code.

1. Press

twice to redial the last number you

dialed. The last 30 numbers are stored in the call

history list and you can also select one of these to

redial.

Call Failed - indicates the call did not go through.

Restricted - indicates outgoing calls are in

restricted mode.

Receiving Calls

Note

1. When the phone rings or vibrates, press

If the phone is restricted, you can only dial phone

numbers saved in the Emergency Numbers or your

Contacts. To turn off this function: Menu ->

answer.

Note

Settings ->

Security -> Enter lock code ->

If you press

, Left Soft Key

(the side keys)

Restrict Calls -> None -> OK

while the phone is ringing, the ringing or vibration is

muted for that call.

4. Press

to end the call.

2. Press

twice to end the call.

QUICK ACCESS TO CONVENIENT FEATURES

Manner Mode

Mute Function

The Mute Function doesn’t transmit your voice to

the caller. To quickly activate Mute press Left Soft

Key [Mute], then to cancel press Left Soft Key

[Unmute].

Sets the phone to vibrate instead of ring (

displayed). To quickly set Manner mode press and

hold

. To return to Normal mode, press and

Volume Quick Adjustment

Lock Mode

Use the side keys to adjust the earpiece and ringer

volumes. The upper key increases the volume and the

lower key decreases the volume.

Sets your phone to require your 4-digit password in

order to use the phone.

●

Earpiece volume can be adjusted during a call.

Note

Ringer volume can be adjusted during a call.

Until you change it, the lock code/password is the last 4

digits of your phone number.

Note

Key beep volume is adjusted through the Sounds Volume

To quickly lock your phone press

for three

(Menu -> 9 -> 1 -> 4).

seconds. To cancel, press Right Soft Key [Unlock]

and enter the password.

Call Waiting

Speed Dialing

Your cellular service may offer call waiting. While a

Speed dialing is a convenient feature that allows you

call is in progress, two beeps indicate another

to make phone calls quickly and easily with a few

incoming call. When call waiting is enabled, you may

keystrokes. Your phone recalls the number from your

put the active call on hold while you answer the

Contacts, displays it briefly, and then dials it. Speed

other incoming call. Check with your cellular service

provider for information about this function.

Dial Number 1(Unchangeable) is assigned to Voice

Mailbox by default, but you can change it.

1. Press

to receive a waiting call.

Dialing Single Digit Speed Dials (from 2 to 9)

Press and hold the Speed Dial number.

2. Press

again to switch between calls.

Caller ID

Enter the speed dial number and press

Caller ID displays the phone number or name of the

incoming call. If the caller’s identity is stored in Contacts,

Dialing Double Digit Speed Dials (from 10 to 99)

the name appears with the number. Check with your

service provider to ensure they offer this feature.

Press the first digit and then press and hold the

key of the last digit.

Enter the first and second digits and press

ENTERING AND EDITING INFORMATION

Text Input Examples

Text Input

The following key functions are available to help with

Display the text modes and select a text mode:

text entry:

1. In a text entry field, press Left Soft Key

display text modes.

Key Functions

2. Press

to highlight the text input mode you

●

Left Soft Key: Press to change text input mode.

want to use.

Abc

abc

ABC

Symbols

●

Shift: Use to change case.

3. Press

to select the highlighted text input

mode.

Space: Press to complete a word and insert

a space.

Using Text Input

1. Press Left Soft Key

2. Press

●

BACK: Press to delete a single space

to change to Abc mode.

character. Hold to delete words.

Symbols: Use to insert special characters or

punctuation.

●

Use to type text.

3. Call the office is displayed.

Use to type numbers.

Initial Cap (Abc)

Note

Only the first letter is capitalized. All subsequent

letters are lower case.

The number keys have the patented

™

Thumb-Friendly software, so even if you hit a few letters

by mistake, you will still get the number you want.

Caps Lock (ABC)

All letters are capitalized.

1. Press Left Soft Key

to change to ABC mode.

2. Press

LG is displayed.

Capitalizing Characters

Press to capitalize your next letter.

Lower Case (abc)

All letters are in lower case.

CONTACTS IN YOUR PHONE’S MEMORY

Contacts Entries

Options to Customize Your Contacts

This allows you to have easy access to your most

Once the basic phone number and name information

frequently dialed phone numbers. You may store up

is stored in your Contacts, you can edit and

customize each entry.

to 500 entries with up to 5 phone numbers each.

Each entry may be up to 22 characters.

1. Press Right Soft Key

Contacts and use

highlight the contact entry you want to edit, then

The Basics of Storing Contacts Entries

press

[View]

1. From standby mode enter the phone number you

want to save (up to 48 digits).

2. Press Left Soft Key

Contact screen.

Edit to access the Edit

2. Press

[Save].

3. Use

to highlight the information you want to

3. Select either New contact or Update contact and

customize, then press

press

4. Use

to highlight a Label and press

Adding or Changing the Group

Mobile 1

Home

Work

Mobile 2

Fax

Allows you to manage your Contacts entries by

organizing them into groups.

Note

Use Edit contact to add another phone number to a

1. Press Right Soft Key

Contacts and use

contact already stored in memory.

highlight an entry, then press

2. Press Left Soft Key

Edit

5. Enter a name for the phone number (up to 22

characters) and press

3. Use

to highlight No Group

to select a

A confirmation message is displayed briefly.

group.

Adding or Changing the Memo

4. Use

Key

to select the Group, then press Left Soft

Set, then press

Allows you to enter up to 32 characters as a memo

to the Contact entry.

No Group

Family

Friends

Colleagues

Business

School

1. Press Right Soft Key

Contacts and use

highlight an entry, then press

5. Press

[Save] to save the change.

2. Press Left Soft Key

Edit

Changing the Call Ringer

3. Use

to highlight Memo

Allows you to identify who is calling, by setting

4. Enter text, then press

[Save] to save the

different ringers for different phone numbers in your

change.

Contacts. It is automatically set to the default ringer

when the Contact is saved.

Adding or Changing the Picture ID

1. Press Right Soft Key

Contacts and use

Allows the phone to display an image to identify the

highlight an entry, then press

caller.

2. Press Left Soft Key

Edit.

1. Press Right Soft Key

Contacts and use

3. Use

to highlight Default, then press Left Soft

highlight an entry, then press

Key

Set.

2. Press Left Soft Key

Edit

4. Use

to select one of the Ringtone available,

3. Use

to highlight No Photo.

then press Left Soft Key

[Select].

4. Press Left Soft Key

[Set] to see additional

choices.

5. Press

[Save] to save the change.

CONTACTS IN YOUR PHONE’S MEMORY

Editing Contacts Entries

5. Use

to select one of the images available,

then press

Adding Another Phone Number

6. Press Left Soft Key

Select

From standby mode

7. Press

[Save] to save the change.

1. From standby mode enter the phone number you

want to save (up to 48 digits).

Adding Speed Dial

1. Press Right Soft Key

Contacts and use

2. Press Left Soft Key

[Save]

to highlight an entry, then press

3. Press Left Soft Key and select Update contact.

2. Press Left Soft Key

Edit

4. Use

to highlight the existing Contact entry,

3. Use

to highlight the phone number you want

then press

to set with a Speed Dial, then press Right Soft Key

5. Use

to highlight a Label, then press

[Options].

Mobile1

Fax

Email 1

Home

Work

Mobile2

4. Select Set speed dial.

Email 2

6. Press

to save Contact.

Default Numbers

Editing Stored Phone Numbers

The phone number saved when a Contact is created

1. Press Right Soft Key

Contacts to display your

is the Default Number. If more than one number is

Contacts alphabetically.

saved in a Contact entry, another number can be

designated as the Default Number.

2. Use

to highlight the Contact entry you want

to edit, then press

Changing the Default Number

3. Press Left Soft Key

Edit

1. Press Right Soft Key

Contacts to display your

4. Use

to highlight the phone number.

Contacts alphabetically.

5. Edit the phone number as necessary, then press

2. Use

to highlight the Contact entry you want

to edit, then press

Editing Stored Names

3. Press Left Soft Key

Edit

1. Press Right Soft Key

Contacts to display your

4. Use

to highlight the phone number you want

Contacts alphabetically.

to set as the Default Number, then press Right

2. Use

to highlight the Contact entry you want

to highlight the name.

Soft Key

Options and

Set as default

to edit, then press

3. Press Left Soft Key

[Edit].

4. Use

5. Edit the name as necessary, then press

CONTACTS IN YOUR PHONE’S MEMORY

Deleting

6. Press

[Save] to save the change.

Deleting a Contact Entry or a Phone Number

from a Contact

Editing Customized Options

Edit any of the Contacts options in the same manner

as when the Contact is created.

1. Press Right Soft Key

Contacts to display your

Contacts alphabetically.

1. Press Right Soft Key

[Contacts] to display

your Contacts alphabetically.

2. Use

to highlight the Contact entry, then

press

2. Use

to highlight the Contact entry you want

to edit, then press

3. Press Right Soft Key

Options

3. Press Left Soft Key

[Edit].

4. Select

5. Select

Delete contact

4. Use

to highlight the information you want to

Yes

customize.

A confirmation message is displayed.

5. Edit the information as necessary.

6. Press

[Save] to save the change.

Additional Ways to Delete a Contact

Phone Numbers With Pauses

At any time when your Contacts are displayed, the

When you call automated systems such as voice mail

Right Soft Key

Options allows you to erase the

or credit billing numbers, you often have to enter a

highlighted entry.

series of numbers. Instead of entering these numbers

by hand, you can store the numbers in your Contacts

Deleting a Speed Dial

separated by special pause characters (W, P). There

are two different types of pauses you can use when

storing a number:

1. Press Right Soft Key

Contacts to display your

Contacts alphabetically.

Wait (W)

2. Use

to highlight the Contact entry, then

The phone stops dialing until you press Right Soft

press

Key

Release to advance to the next number.

3. Press Left Soft Key

Edit

2-sec pause (P)

4. Use

6. Press

7. Press

to highlight the existing Speed Dial

The phone waits 2 seconds before sending the next

location.

string of digits.

5. Press Right Soft Key

Options

Remove speed dial

Yes

A confirmation message is displayed.

CONTACTS IN YOUR PHONE’S MEMORY

Storing a Number with Pauses

Adding a Pause to an Existing Number

1. Press Left Soft Key

1. Press Right Soft Key

Contacts to display your

Contacts alphabetically.

2. Press

3. Press

Contacts

2. Use

to highlight the Contact entry to edit,

New Contact

then press

4. Enter the number.

3. Press Left Soft Key

Edit

5. Press Right Soft Key

[Options] and select

4. Use

to highlight the number.

2-sec pause

5. Press Right Soft Key

Options

6. Enter additional number(s) (e.g., pin number or

credit card number), then press

6. Press

Wait or

2-sec pause

7. Enter a name (up to 22 characters).

7. Enter additional number(s), then press

A confirmation message is displayed.

Searching by Letter

Searching Your Phone’s Memory

The AX490 phone is able to perform a dynamic

search of the contents in your phone’s memory. A

dynamic search compares entered letters or numbers

against the entries in your Contacts. A matching list

1. Press Right Soft Key

Contacts to display your

Contacts alphabetically.

2. Press (or press repeatedly) the key on the keypad

that corresponds with the search letter.

is displayed in descending order. You can then select

a number from the list to call or edit. There are

several ways to search:

Searching Options

1. Press Right Soft Key

Contacts

●

Scrolling Alphabetically

●

Searching by Letter

2. Press Right Soft Key

Options

●

Searching by Options

3. Select the search criteria (use

then press

or press the corresponding number on the

Scrolling Through Your Contacts

keypad):

1. Press Right Soft Key

Contacts alphabetically.

Contacts to display your

Send message: Send a text message or photo

message to the selected contact.

2. Use

to scroll through the list.

Delete: Delete the selected entry in your

Contacts.

Edit: Edit the selected contact information.

Call: Make a call to the selected contact.

Send via Bluetooth: Send a contact(vCard) via

CONTACTS IN YOUR PHONE’S MEMORY

Bluetooth. In case Bluetooth functionality is

not on, a notice pops up to turn Bluetooth

functionality on.

From Recent Calls

1. Press Left Soft Key

2. Press

Recent Calls

Delete all: Deletes all contacts.

3. Use

press

to select the type of recent call, then

Cancel: Exits the contact entry.

Missed Calls

Dialed Calls

Received Calls

Making a Call From Your Phone’s Memory

4. Use

to select the phone number.

Once you have stored phone numbers in your

Contacts, you can place calls to those numbers

quickly and easily.

5. Press

to place the call.

Speed Dialing

●

By pressing

after searching for a phone

number in Contacts or Recent Calls and highlighting it.

By using Speed Dialing

For a single-digit Speed Dial, press and hold the digit

●

or press the digit, then press

. For a double-digit

Speed Dial, press the first digit and hold the second

From Contacts

digit or press the first and second digits, then press

1. Press Right Soft Key

Contacts alphabetically.

Contacts to display your

2. Use

3. Use

4. Press

to select the Contact entry, then press

to select the phone number.

to place the call.

Menu Access

Note

Press Left Soft Key

Menu to access nine phone

Press

to go back one step (while accessing a menu

menus. There are two methods of accessing menus

and submenus:

or selecting a setting). Changes to settings will not be

saved.

●

Use the navigation key to highlight and select, or

●

Press the number key that corresponds to the

menu (or submenu).

For example:

1. Press Left Soft Key

2. Press the appropriate number key corresponding

Menu to display nine menu

items.

Use

to scroll through the list of menus.

to the menu item you want to select.

The sub-menu list will be displayed.

3. Press the appropriate number key corresponding

to the sub-menu you want to access.

4. Use

to highlight your preferred setting, then

press

to select it.

MESSAGING

Text messages, pages, and the voice mail box become

available as soon as the phone is powered on.

Messaging

Access and Options

●

Check types of messages by pressing the message

key

1. Press Left Soft Key

2. Press

Messaging

●

Make a call to the callback number by pressing

during an Inbox message check.

3. Select a sub-menu.

1. New Text Message: Sends a

●

Read and edit messages saved in the outbox after

message.

transmission and resend them.

2. New Photo Message: Sends

The phone can store up to 385 messages (50 inbox

text messages, 100 inbox photo messages, 100

photo notification messages, 50 outbox text

an photo message.

3. Inbox: Shows the list of

received messages.

messages, 50 outbox photo messages,15 draft text

messages, 20 draft photo messages). The AX490

supports up to 160 characters per message up to 10

supported by EMS including header information. The

information stored in the message is determined by

phone mode and service capability. Other limits to

: Shows the list of sent

messages.

5. Drafts: Shows the list of saved

and draft messages.

6. Voice Mail: Shows the number

of messages in voice mail box.

available characters per message may exist. Please

check with your service provider for system features

and capabilities.

7. Settings: Sets the way of

sending and receiving

messages.

8. Delete All: Deletes all stored

messages.

New Message Alert

1. New Text Message

There are three ways your phone alerts you to new

Allows you to send text messages, EMS messages,

messages.

pages, and e-mail transmissions. Each message has a

destination (Address 1) and information (Message).

1. The phone displays a message on the screen.

These are dependent upon the type of message you

want to send.

2. One of eight ring types is heard, if selected.

(Four ring types only for text messages)

The Basics of Sending a New Text Message

3. 2 min reminder (when set to On)

1. Press

Note

2. With the highlight on Address 1, press

3. Enter the recipient's address, then press

If you receive the same message twice, your phone

deletes the older one and the new one is stored as a

Duplicate.

Note

To send a page, press

Send now.

4. Press

to access the message screen.

Send.

5. Type your message (text or e-mail), then press

6. Press

A confirmation message is displayed.

MESSAGING

Customizing the Text Message Using Options

Text Options

While you are composing the text of a message you

1. Create a new message.

can insert customized text.

2. Press Right Soft Key

Options

1. Create a new message.

3. Select the option(s) to customize.

2. Use

to highlight Message, and then press

Contacts

Contacts to select a recipient

3. Press Right Soft Key

Options

from your Contacts list.

4. Select the option(s) to customize.

Recent calls

Recent calls to select a

recipient from your Recent

calls.

Add

Graphic

Animation

Sound

Quick text

Signature

Text format

Allows you to change the look

Group

Group to select a recipient

of the text.

from your Group.

Alignment Font size/ Font

style Text color/

Family

Friends

Colleagues

Background

Business

School No Group

Save as draft

Priority level

Callback #

Delivery notice

Cancel

Save your message as draft.

Cancel

Cancels editing your message.

Normal

Urgent

4. Complete and send the message.

On Off/ Edit

Enhanced Normal

Cancels editing your message.

5. Complete and send or save the message.

Message Icon Reference

4. With the highlight on [Photo], use

to highlight

a picture, then press Left Soft Key

Add

Text Message

Multi EMS delivered

Failed Multi SMS/EMS

Multi Msg Pending

Multi SMS/EMS in transfer

Read urgent text message

Sent SMS/EMS

5. With the highlight on [Sounds], use

Delivered EMS

Failed SMS/EMS

Sent Message

Read SMS/EMS

Unread

highlight a sound.

You can record your voice memo by pressing Left

Soft Key [Add] and send it with your message.

Sounds are Default/ Downloaded/ Voice Clip

6. Highlight on Subject.

Unread_Urgent

7. Enter the subject.

Lock

8. Press

to access the message screen.

9. Press Right Soft Key

Options

2. New Photo Message

10. Select the option(s) to customize.

Allows you send messages with Text, Picture and Sound.

●

Editing Receiver

1. Press

Contacts To Online Album/ Recent calls/

2. Enter the recipient's address, then press

Group Cancel

Search the destination by scrolling your Contacts,

●

Editing Text

To Photo Place, Recent calls and Group after

Preview

Add

Shows your message before sending.

pressing Right Soft Key

[Options].

Quick text Signature

3. Type your message (text or e-mail).

MESSAGING

Save as draft

Priority level

Saves your message as draft.

Message Icon Reference

Normal Urgent

Phot_Ro_eaM_de_Ps_hs_oa_tog_Me_essage

Delivery notice Informs you that the message has

been successfully delivered to the

recipient.

Unread Photo Message

Enhanced Normal

Read Urgent Photo Message

Unread Urgent Photo Message

Read Photo Message Notification

Unread Photo Message Notification

Delivered Photo Message

Remove

Cancel

Photo/Sound

Cancels the contents of message

field.

●

Editing Photo

Preview

Take photo

Save as draft

Priority level/

Delivery notice

Remove

Cancel

Sent Photo Message

●

Editing Sounds

Failed Photo Message

Preview

Record voice

Save as draft

Multiple Recipient Incomplete Photo Message

Multiple Recipient Failed Photo Message

Priority level

Delivery notice

Remove

Cancel

●

Editing Subject

Preview

Add

Save as draft

Priority level

Delivery notice

Remove

Cancel

11. Complete and send the message.

received even when the memory is full.

Viewing Your Inbox

3. Inbox

The phone alerts you in 2 ways when you receive a

new message by:

Up to 50 received messages can be stored in the Inbox.

●

Displaying a message notification on the screen.

1. Press

●

Displaying the message icon

when the message is urgent.)

. (It blinks

2. Use

to highlight an Inbox message.

●

Left Soft Key

Reply complying with the

kinds of messages (Text Messages/Photo

Received text messages, page messages, Photo

messages and e-mail lists may be searched and the

Messages).

●

Right Soft Key

Options

contents viewed. Received messages are displayed

from newest to oldest.

3. Use

to highlight an Inbox message, then

Out of Memory Warning

press

If the memory is full, no more messages can be

received until enough memory space becomes

available. When there is no space to save Text

Messages, Text msg 100% full. Erase text msgs from

4. While viewing the selected message, press Left

Soft Key

Reply or Right Soft Key

Options

Options from here:

Delete

Inbox now to receive new text. is displayed. For Photo

Messages, Photo msg 100% full. Erase photo from

Inbox now to receive new photo. For Photo Messages

notifications, NOTI msg 100% full Erase notification

from Inbox now to receive new noti. is displayed.

When you Auto Delete is on, the messages are

Deletes the selected message.

Forward

Forwards a received message

to other destination

address(es).

MESSAGING

Lock/ Unlock

Information

Locks or unlocks the selected

message.

3. Use

to highlight an Outbox message, then

. While viewing the selected Outbox

press

Shows the message type

priority and status.

message, press Left Soft Key

Resend to or

press Right Soft Key

Options

Delete multiple

Selective/ All

Options from here:

Delete

Deletes the selected message.

4. Sent

Forward

Forwards a received message

to other destination

address(es).

Up to 50 sent messages or Photo Messages can be

stored in the Outbox. View lists and contents of sent

messages and verify whether the transmission was

successful or not.

Lock/ Unlock

Information

Locks or unlocks the selected

message.

1. Press

Shows the message type

priority and status.

2. Use

to highlight an Outbox message.

Delete multiple

Selective/ All

●

Press Left Soft Key

Press Right Soft Key

Resend

●

Options

5. Drafts

6. Voice Mail

Allows you to view new voice messages recorded in

the voice mail box. Your phone will alert you when

you receive a new voice message.

Displays saved messages and draft messages.

1. Press

2. Use

to highlight a saved message.

Checking Your Voice Mail Box

●

Press

Edit

1. Press

●

Press Right Soft Key

Options

2. Options from here:

Delete

Deletes the selected message

●

Press

to listen to the message(s).

from the Drafts.

Lock/ Unlock

Locks a message so that it is

not erased if the Erase Saved

or Erase All feature is used.

Delete multiple

Selective/ All

MESSAGING

7.4 Photo-Auto Receive

7. Settings

Allows you to set photos to be received automatically.

Allows you to configure 9 settings for received messages.

(On/ Off)

1. Press

7.5 Text-Callback #

2. Use

press

to highlight one of the settings and

to select it.

Allows you to automatically send a designated

callback number when you send a message. Allows

you to manually enter the number. (On/ Off/ Edit)

Message Settings Sub-Menu Descriptions

7.6 Voice Mail #

7.1 Auto Save

Allows you to manually enter the number for Voice

Mail Service. This number should be only used when

a VMS access number is not provided from the

network. (Edit Voicemail #.)

Allows you to automatically save sent messages in

your Outbox. You can choose Auto save, Prompt, or

Do not save. (Auto save/ Prompt/ Do not save)

7.2 Auto Delete

7.7 Entry Mode

With this feature on, read messages(except locked

messages) are automatically deleted when you

exceed the storage limit. (On/ Off)

Allows you to select the default input method.

(Abc/ abc/ ABC)

7.8 Quick Text

7.3 Text-Auto View

Allows you to display, edit, and add text phrases.

These text strings allow you to reduce manual text

input into messages.

Allows you to directly display the content when

receiving a text message. (On/ Off)

7.9 Text-Auto Play

8. Delete All

With this feature on, the display automatically scrolls

Allows you to erase all the messages stored in your

down while viewing messages. (On/ Off)

Inbox, Outbox, or Saved messages folders. You can

also erase all messages at the same time.

7.0 Text-Signature

1. Press

Allows you designate a signature to automatically

send with your messages. You can create a custom

signature line or use your Contact Info.

●

Press

Inbox to erase all messages stored

in the Inbox.

(None/ Custom/ My contact info)

●

Press

Sent to erase all messages stored

7. 2-Min Reminder

in the Outbox.

Allows you to set your phone to remind alert every 2

Press

Drafts to erase all messages stored

minute. (On/ Off)

in the Saved messages folder.

Press

All to erase all messages stored in

the Inbox, Outbox, and Saved messages folder.

AXCESS APPS

receive a busy signal.

AxcessApps

When using applications, an incoming call will

automatically pause the application and allow you to

answer the call. When you complete your call, you

can resume using the application.

Axcess Apps allows you to do more than just talk

on your phone. Axcess Apps is a technology and

service that allows you to download and use

applications on your phone. With Axcess Apps, it is

quick and easy to personalize your phone to your

Access and Options

lifestyle and tastes. Just download the applications

that appeal to you. With a wide range of software

available, from ringtones to games to productivity

1. Press Left Soft Key

2. Press

Axcess Apps

tools, you can be assured that you can find

something useful, practical, or down right

entertaining.

3. Options from here:

1. Axcess Apps: To add, delete,

Downloading Applications

or disable Axcess Apps

applications.

You can download applications and use Axcess Apps

anywhere on the network, as long as your handset

has a digital signal available. Most applications do

not use a network connection while in use.

2. Axcess Info: To view

information about Axcess

Apps applications.

Incoming Calls

While downloading an application, incoming calls will

automatically be sent to your voice mail, if available.

If you do not have voice mail, downloading will not be

interrupted by an incoming call, and the caller will

1. Axcess Apps

2. Axcess Info

Allows you to download selected applications while

Gives you information about the Axcess Apps

displaying the Axcess Apps application list relayed

selection key.

from the Axcess Apps server connection.

1. Press

2. Press Left Soft Key

Yes

2. Press

Managing Your Axcess Apps Applications

3. Select [Axcess Apps] Icon and press

Add new applications and remove old ones at any time.

Shortcut

Removing Applications

Pressing the right arrow key

will start Axcess Apps.

Only removing an application deletes it completely

from the memory of the phone. To restore an

application once it has been removed will require that

you pay and download it again.

Note

When the file memory is full, the message "File Memory is

displayed?". To make enough storage space to install this

app, the following app(s) will be temporarily disabled :

You can restore disabled apps by simply starting them, at

1. Access Axcess Apps.

2. Select Settings.

no additional purchase cost. Proceed?" will be displayed.

If you select Yes, the app(s) will be disabled.

3. Use

to highlight Manage Apps, then press

4. Use

to highlight the application to be

deleted, then press

5. Select Remove

AXCESS WEB

1. Start Browser

Axcess Web

Allows you to initiate a MiniBrowser session.

The Axcess Web feature allows you to view internet

content. Access and selections within this feature are

dependent upon your service provider. For specific

1. Press

2. After a few seconds, you see the Home Page.

information on Axcess Web access through your

phone, contact your service provider.

Ending a MiniBrowser Session

Access and Options

End a MiniBrowser session by pressing

1. Press Left Soft Key

Navigating Through the Browser

2. Press

Axcess Web

On-screen items may be presented in one of the

following ways:

3. Select a sub-menu.

●

Numbered options

1. Start Browser

2. Web Messages

3. Web Alerts

You can use your numeric keypad or you can

select the items by moving the cursor and pressing

the appropriate Soft Key(s).

●

Links embedded in content

You can act on the options or the links by using

the Soft Keys just below the display screen.

●

Text or numbers

Soft Keys

You can select the items by moving the cursor and

To navigate to different screens or select special

pressing the appropriate Soft Keys.

functions, use the Soft Keys. The function associated

with the Soft Keys can change for each page and

depends on each highlighted item.

Scrolling

Use

to scroll through the content if the current

Left Soft Key

page does not fit on one screen. The currently

selected item is indicated by a cursor on the screen.

Left Soft Key

is used primarily for first options or

selecting an item but its function may change,

Fast Scrolling

depending on the content displayed.

Press and hold

to quickly move the cursor up

Right Soft Key

and down on the current screen.

Right Soft Key

is used primarily for secondary

Scrolling by Page

options or a menu of secondary options.

Press the Side Keys to move up and down a page at a

Entering Text, Numbers, or Symbols

time.

When prompted to enter text, the current text entry

Home Page

method appears above the Right Soft Key

Press and hold

to access the Home Page.

Alpha

Symbol

Number

Word, or Smart. To change

the input mode, press the Right Soft Key . To

View Browser Menu

change to upper case, press

. The text method

Press to use the Browser menu.

appears above the Right Soft Key

as ALPHA

WORD, or SMART

AXCESS WEB

Clearing Out Text/Number Entered

3. Web Alerts

When entering text or numbers, press

to clear

Allows you to select a browser alert sound.

the last number, letter, or symbol. Press and hold

to clear the input field completely.

1. Press

2. Select an alert option.

Initiating a Phone Call From Mobile Web

Mute

2 beeps

4 beeps

You can make a phone call from Mobile Web if the

site you are using supports the feature (the phone

number may be highlighted and Left Soft Key

appears as Call). The browser connection is

terminated when you initiate the call. After you end

the call, your phone returns to the screen from which

you initiated the call.

2. Web Messages

Allows you to view Web messages. If there are any

browser messages, the list is displayed from newest

to oldest.

1. Press

Your list of Web messages is displayed.

MULTIMEDIA

₁1_.._PT_rea_sk_se Photo_,

Multimedia

View, take and trade your digital pictures and video

right from your wireless phone.

Note

Access and Options

Pressing the Side Camera Key from standby mode is a hot

key to Take Photo.

1. Press Left Soft Key

2. Set the brightness

press Right Soft Key

settings.

, zoom

, flash, and

2. Press

Multimedia

Options to change other

3. Select a sub-menu.

1. Take Photo

2. Record Voice

3. Gallery

●

Select the option(s) to customize.

Resolution

640X480/ 320X240/

160 X 120

4. Voice Clip

Quality

Fine/ Normal/ Economy

Zoom

Brightness

Flash

Always On/ On/ Off

Multishot

Self timer

White balance

1 shot/ 3 shots/ 6 shots

None/ 3 seconds/ 5 seconds

Auto/ Sunny/ Cloudy/

Tungsten/ Fluorescent

On/ Off

Night mode

MULTIMEDIA

Filter effects

Color/ Sepia/ Mono/

2. Record Voice

Negative

Allows you to add, listen to, and erase short verbal

Shutter sound

Shutter1/ Shutter2/

reminders.

Shutter3/ Shutter4/

No Sound

1. Press

2. Press

Template

frame1/ frame2/ frame3/

REC to record a new voice memo.

frame4/ frame5/ frame6/

frame7/ frame8/ frame9/

frame10

3. Talk into the microphone, then press

Stop

4. While the highlight is still on the recording, press

Note

Right Soft Key

Options to access the

When the Flash is On, take the photo within 12 inches of

following:

the subject.

●

Set as

3. Take a picture by pressing

●

Cancel

4. Press Left Soft Key

Save

The picture is stored in Gallery

Using the Side Camera Key

You can use the Side Camera Key

to use the sub

menu list.

1. Press the Side Camera Key

for about 3

seconds to enter the Take Picture mode.

2. Take a picture by pressing Side Camera Key

3. Gallery

Allows you to view pictures stored in the phone.

1. Press

2. Select your desired picture with

and press

Right Soft Key

Options

Send

Set as

Delete

Rename

List view

Delete all Information

4. Voice Clip

1. Press

2. Check out the stored voice clip files, press Right

Soft Key

Options to access the following:

●

Send

Delete

Delete all

Set As

●

Rename

Information

●

CONTACTS

1. Contacts

_TC_ho_{e C}n_ot_na_tac_ct_tss_{Menu allows you to store names,}

Allows you to view your Contacts list.

phone numbers and other information in your

phone’s memory. When you access your Contacts,

1. Press

2. Options from here:

the number in parentheses represents the number of

entries you have stored (up to 500).

●

Press

to scroll through your Contacts

alphabetically.

Access and Options

●

Press Right Soft Key

Options to select one

1. Press Left Soft Key

[Menu]

of the following:

2. Press

Contacts

Send message Delete/ Edit/ Call/ Send via

Bluetooth

Delete all

Cancel

3. Select a sub-menu.

●

Press Left Soft Key

New to store new

1. Contacts

contact information.

2. New Contact

3. Groups

4. Speed Dials

5. My Contact Info

2. New Contact

3. Groups

Allows you to add a new contact to your Contacts.

Allows you to view your grouped Contacts, add a new

group, change the name of a group, or delete a

whole group.

Note

Using this sub-menu, the number is saved as a new

1. Press

Contact. To save the number into an existing Contact,

edit the Contact entry.

2. Options from here:

●

Use

to highlight a group to view, then

1. Press

press

2. Enter the name and press

●

Press Left Soft Key

New to add a new group

to the list.

3. Use to select the phone number type and

continue saving the entry as necessary.

●

Use

to highlight a group, then press Right

Soft Key

Options to change the name of

Mobile 1 Email 1/ Home/ Work/ Group/

Photo

Memo

the group or delete the group.

Ringtone/ Mobile 2/ Email 2/ Fax/

Delete

Send message

Rename group

Set group ringtone

Delete all

CONTACTS

4. Speed Dials

5. My Contact Info

Allows you to view your Speed Dials list, designate

new Speed Dials, or remove Speed Dial designations

entered in your Contacts.

Allows you to view your contact information.

1. Press

2. Use

to select the feature you want to edit,

1. Press

2. Use

then press Left Soft Key

to highlight the Speed Dial position (or

3. Edit the information as necessary.

enter the Speed Dial digit), then press

3. Use

4. Use

to highlight the Contact.

Note

You cannot edit phone number, but you can add an

to highlight the number, then press

additional phone number.

A confirmation message is displayed.

RECENT CALLS

1. Missed Calls

2. Dialed Calls

3. Received Calls

4. Data Calls

5. All Calls

Recent Calls

The Recent Calls Menu is a list of the last phone

numbers or Contact entries for calls you placed,

accepted, or missed. It is continually updated as new

numbers are added to the beginning of the list and

the oldest entries are removed from the bottom of

the list.

6. Call Timer

7. Data Count

Note

To view a quick list of all your recent calls, press

from

standby mode.

Access and Options

1. Missed Calls

1. Press Left Soft Key

Allows you to view the list of missed calls; up to 30

entries.

2. Press

Recent Calls

1. Press

2. Use

3. Select a sub-menu.

to highlight an entry.

RECENT CALLS

2. Dialed Calls

4. Data Calls

Allows you to view the history of data connections.

Allows you to view the list of outgoing calls; up to 30

entries.

1. Press

2. Use

to highlight an entry.

1. Press

2. Use

to highlight an entry.

to view the entry.

5. All Calls

●

Press

Allows you to erase selected call list(s).

1. Press

●

Press

to place a call to the number.

2. The history of all calls are displayed.

●

Press Right Soft Key

Options to select Save

contact

Delete

Call

Delete all

6. Call Timer

●

Press Left Soft Key

Message to select Text

Allows you to view the duration of selected calls.

message

Photo message

1. Press

Press

to return to the standby mode.

2. Use

to highlight a call list, then press

Last call

Home calls

Roam calls

All calls

3. Received Calls

7. Data Count

Allows you to view the list of incoming calls; up to 30

Allows you to view the list of received and transmitted

entries.

data calls.

1. Press

2. Use

1. Press

2. Use

to highlight an entry.

to highlight the list.

Transmitted

Received

Total

MY MEDIA

1. Images

My Media

Allows you to choose images to your phone to

This menu allows you to use a wide variety of images,

display as the background image displayed on the

sounds, and more.

phone. (Main LCD/ Front LCD/ Power on/ Power off/

Photo ID)

Access and Options

1. Press

1. Press Left Soft Key

2. Press Right Soft Key

Options to select

2. Press

My Media

Set as

Delete

Rename

Delete all

Information

3. Select a sub-menu.

1. Images

2. Sounds

Allows you to choose the downloaded ringtones

heard for incoming calls.

3. Message Objects

4. Shuffle

1. Press

2. Press Right Soft Key

Options to select

Set as contacts

Set as caller ID

Set as no caller

Set as restrict

MY MEDIA

3. Message Objects

4. Shuffle

Allows you to set objects to correspond with your

Allows you to set wallpaper/ringtone randomly

messages.

among lists. If you turn off the phone, the setting is

deactivated.

1. Press

2. Select one of the following (highlight and press

or press corresponding key):

2. Select Ringtone List

Wallpaper List then press

●

Small Pictures

●

Large Pictures

●

My Pictures

●

Sounds

●

My Melodies

●

Animations

●

My Animations

3. Use

to highlight your selection, then press

TOOLS

1. Voice Command

Tools

Allows you to make phone calls quickly and easily by

voice. Your phone recalls the number from your

Contacts, displays it briefly, and then dials it. This menu

Your phone tools include a Voice Command, My

Menu, Alarm Clock, Calendar, Tip Calculator,

Notepad, Calculator, World Clock and Stopwatch.

also includes feature for those who are in driving or

blind. It delivers time information by voice and allows to

check out the missed calls, messages and voicemails.

Access and Options

1. Press Left Soft Key

1. Press

2. Press

Tools

2. When prompted, say “Call Someone”.

3. Select a sub-menu.

3. When prompted, say the name of the Contact you

1. Voice Command

2. My Menu

want to call. The phone will ask you to confirm the

name before dialing.

4. Also, you can dial any number not to speak of the

listed contact. Press the 4,7,10,11 digit numbers

continuously.

3. Alarm Clock

4. Calendar

5. Tip Calculator

6. Notepad

Call Someone/ Digit Dial/ Voice Mail/ Missed

Calls/ Messages/ Time & Date

7. Calculator

8. World Clock

9. Stopwatch

TOOLS

●

If you select Manual, you can set alarm time manually

2. My Menu

using

Lets you access to favorite menu quickly by customizing

For example, you can take a nap in the afternoon with

the quick alarm set to 30 minutes later. It will allow

you to wake up on time.

my menu. Max 12 items can be stored in My Menu.

1. Press

2. Select the menu of your choice by using

4. Use

to highlight Once (recurring setting).

then press

5. Press

to select one of the following.

3. Select the Menu to add to My Menu with

Once

Daily

Mon ~ Fri

Sat ~ Sun

then press

6. Use

to highlight Alarm tone.

3. Alarm Clock

7. Press Right Soft Key

to select one of the

Allows you to set one of five alarms. The current time

is displayed at the top of the screen when you select

an alarm to set. At the alarm time, Alarm 1 (or 2 or

3, as applicable) will be displayed on the LCD screen

and the alarm will sound.

available alarm ring types.

8. Use

to select a note and enter a memo as

necessary in Note. Use Left Soft Key

to select

text input mode (Abc/abc/ABC/Symbols).

1. Press

2. Press

9. Press

Save

[New

]

Note

3. In Time option, you can select Off/ Manual/

To turn the alarm off, press Right Soft Key

Snooze

10 minutes later/ 20 minutes later/ 30 minutes

later/ 1 hour later.

4. Calendar

5. Tip Calculator

Allows you to conveniently keep and access your

Allows you to quickly and easily estimate the initial

agenda(s). Simply store your appointments and your

amounts for a bill with the calculated amount of the

phone will alert you with a reminder of your

bill, the amount and percentage of the tip, and the

number of people as variables.

appointment.

1. Press

2. Use

to highlight the scheduled day.

6. Notepad

Moves cursor to the left.

Moves cursor to the right.

Moves to the previous week.

Moves to the next week.

Allows you to add, read, edit, and erase notes to

yourself.

1. Press

2. Press Left Soft Key

New to write a new note.

3. Press Left Soft Key

New

3. Type the note, then press

4. Enter your schedule information including:

A confirmation message displays briefly, then

displays your list of notes.

●

Date

Time

Subject

Repeat

Expiration

Reminder

Ringtones

Viewing a Notepad Entry

1. Access Notepad and highlight the entry.

5. Press

Save

2. To erase, press Right Soft Key

Options

TOOLS

●

Delete

Edit

8. World Clock

Allows you to determine the current time in another

time zone or country.

Delete all

1. Press

To edit highlight the entry, then press

[View]

2. Press Right Soft Key

Cities to move the time

and press Left Soft Key

Edit

bar across the world map and display the

date/time in that location.

7. Calculator

3. Press Left Soft Key

[Set DST]

Allows you to perform simple mathematical

calculations. You can enter numbers up to the fifth

9. Stopwatch

decimal place.

Stopwatch is available just as common stopwatches

we see and use in daily life.

1. Press

2. Enter data.

1. Press

●

Use keypad to enter numbers.

2. Press

stop.

Start to start, and press

Stop to

●

Use

to enter decimals.

Press Left Soft Key

Press Right Soft Key

to clear the entry.

to enter function.

●

You can use the Lap function using Left Soft

Key Lap. Max. 20 lap time is available. And lap

time can be recorded.

Use Navigation Key to enter operators.

Press

to complete equation.

3. Press Left Soft Key

Reset to reset.

SETTINGS

1. Sound

Settings

Options to customize the phone’s sounds.

The Settings menu has options to customize your

phone.

1.1 Ringers

Access and Options

Allows you to assign ring tones for incoming calls.

1. Press

1. Press Left Soft Key